Please appreciate the details, so the complete situation can be visualized:
The office network:
New Mac Mini PC running Win 7Pro 64, (in boot camp), networked to an iMac running the same Win 7 Pro 64, VM, UNDER Fusion 7Pro.
To review: My treatment rooms former dell PC/running vista business/ running the server and network versions of my Dental practice mgmt & X-ray capture apps, had no probs WLAN to the front desk iMac running the same PC client dental network apps under the same vista business, & Fusion 4. The dell slowly fried its power supply .
I could not wait to replace it with a Mac mini/ boot camp/ win7 pro 64 bit, as it has to run natively to capture X-rays. The front desk iMac was also upgraded to os10.10.3/ Fusion 7pro/ and its own matching Win7 pro 64bit. The iMac is wired and WLAN connected to a netgear d600 router and a Time Warner Cable modem. The modem then failed and was replaced by an arris modem. As the Arris was configured out of the box, the network ran much slower slowed, as compared to the original modem. BUT- The Vonage 2 line phone system stopped working- no incoming or outgoing voices could be heard after it rang. Then twc remote configured it and the phone now works, but the network iMac slowed to a crawl, and now freezes when accessing the Mac Mini PC dental server to edit or enter data. The Mini perfectly accesses the internet via wifi. It accesses the front desk canon printer by wifi, and can print share they the iMac that is wired to the printer, as well, BUT, the network connection is a spinning pinwheel. The front desk imac easily finds the Mac Mini PC server on the network. It connects easily by entering the servers IPv4 address SHOULD THAT last value change. But if data isn't entered in slow motion, the window and app freezes, and has to be force quit by Task Manager!
Cause:
1. I think TWC switched the cable modem from the default- Non Bridged, to Bridged mode. Could this be the cause?
2. The network setting in fusion, on the iMac is auto detect, a setting that always worked with vista and with the new Win7 system, before TWC installed the new arris modem. 3. Switching to NAT does not work at all is there a different setting to use?
3. Does the Netgear Router have to have a port or pref configured so as not to block the Server.
4. might in need an Access Point (I have an extra netgear wdr3400) ).
5. Do I need an Extender that plugs into the AC LINE?
I hope this info helps.
PS:(some addtl info:
1. File sharing works fine between the minis -Mac and boot camp sides and between the iMacs- Mac and VM sides and between eother side to or from either of the 2 computers! 2. Also either office computer and all of my my home macs , (& my iPad, & iPhone), can access each other instantly and flawlessly, with splash top streamer and jump desktop remote apps, as controller or as client! In fact, the front desk iMac can remote control the mini PC AS IF YOU WERE DIRECTLY ENTERING INFO I TO IT!
SO I think it's either a misconfiguration in the TWC cable modem &/or some additional pref to config in the router? Thanks so much for your help, (been using VM's since VPC1. & Win95 in a iMac, 1999, DV MODEL! (TWC BLAMES VONAGE FOR NOT OPENING SOME PORTS IN THE TELE MODEM. Vonage blames TWC FOR NOTopeningj ITS PORTS IN THE CABLE MODEM, when they meant the ports on the Netgear. They have passed the buck for 6 weeks with not even a guess at what to do. VERY FRUSTRATING! Again, thanks to all!